Hydraulic pump station structure and main technical parameters:

Structure: mainly in the form of the structure of the motor and pump device, installation position and cooling method to distinguish.

According to the motor - the structure of pump, the installation position can be divided into three types:

1. On vertical: buy motor - vertical pump device installed on the tank cover, quantitative pump is mainly used in the system.

2. Horizontal: placed on the motor - horizontal pump device installed on the tank cover, it is mainly used for variable pump system, convenient for flow control.

3. Set the type of motor - pump horizontal installed beside the fuel tank, on the basis of single set equipment spare motor - pump device, mainly used for fuel tank volume is more than 250 liters, motor power is greater than 7.5 kw system.

According to the cooling system of hydraulic pump station can be divided into two kinds:

1. The natural cooling: by itself and the air heat exchange cooling tank, commonly used in oil tank volume is less than 250 litres of system.

2. The forced cooling: the cooler for forced cooling, commonly used in tank volume is more than 250 liters of system.